This is the Ultimate xxx Review of the RoboBrew V3 with Pump Electric Brew System…
Looking for an all-grain brewing system with pump, step mashing, mashing schedule, malt pipe basket, and free tubings but the budget is tight?
If I could give a trophy for the best all-in-one electric brewing system for commercial use, this version 3 of the RoboBrew electric brewing system with pump will be the no-brainer recipient.
In this comprehensive review, we’ll cover:
- RoboBrew V3’s 9 Gallon capabilities
- Built-in features and functions
- Automated step mash and delayed start
- Lots more…
So if you’re new to the complex art of all-grain brewing or a complete homebrewing newbie, this review might just be for you!
Mugs up.
Let’s get started.
- Capacity: 9.25 gallon
- Dimensions: 32.13 x 18.66 x 18.43 inches
- Temperature: Simply set the temperature to 120 degrees celsius and turn both elements
- Power / Voltage: 110V but it also comes in a 220v model
- Manufacturer: Keg Land
Overall Score:
78
The Bottom Line:
An affordable all in one electric brewing system that comes with its own accessories to jumpstart your homebrewing. Because it’s jam-packed and less costly than most models, it’s perfect if you want to take your beers to the next level commercially.What’s Good
- Standard 100 volts so it can be used anywhere
- With a built-in pump, grain basket, and built-in spigot
- The control panel is water resistant
- Dual heating element has individual switches so you have more control
What’s Bad
- Doesn’t come with silicon tubing
- You may need help from a neoprene jacket because this brewer takes time to heat
Our Verdict: RoboBrew V3 Electric Brewing System With Pump
Before anything else, let me just appreciate the fact that RoboBrew is humble enough to listen to its community, thus the version 3 of this particular brewing system….and that makes them kings of improvement in my opinion.
Version 3 means there were other models that went before this one.
Apparently…
The steel was either too flimsy or the chiller was too weak.
We just know one thing now, and that is this is the product of RoboBrew’s relationship with their customers and turning the bad reviews into an advantage.
The price point seems really fair and if you’re completely new to all grain brewing and don’t want to invest in expensive equipment yet, this RoboBrew V3 fits the bill.
But…
That doesn’t necessarily mean that the quality is as low as its price.
Let’s talk about the material.
While users complained that the earlier version had very thin and sharp steel material that’s easily dented, the company took it up a notch this time with thicker steel walls and it even has a cap at the bottom of the malt pipe so it’s not too sharp to the touch.
Kudos to that!
Assembly was fairly easy. I only had to attach the handle for the lid, the built-in spigot, and the 1D silicone tubing and I was good to go.
Heating process was also simple, a plus point for the beginners.
This unit uses two heating elements with the other one having 1000 watts of power and the other 500 watts. It has 2 individual switches for each element so you can use just one or both should you want to ramp up the strike water temperature.
Thanks to its improved circuit board, it also boasts of automatic step mashing functions to turn a usually stressful brew day into an easy and breezy one.
The step mashing function allows you to choose how many stages you’ll need and set mash temp and mash schedule with its built-in temperature controller so you can personalize everything according to your preference.
In case you want to skip a step, just set the timer to zero and the system will automatically skip it.
Included in the step mashing function are the boil addition timers that’ll tell you when it’s time to put the hops or other additions in case you become too occupied with house chores while waiting.
Like most home brewing systems today…
…it also features a delayed start timer with the only difference being that this brewing system is much cheaper but with the same function.
Using the delayed start function proved really convenient for me. I woke up the morning of brew day with a hot mash water ready and waiting for me.
These functions can be accessed through the unit’s onboard water resistant control panel.
And just like its more expensive contemporaries, the RoboBrew V3 also comes with a stainless steel malt pipe with false bottom.
As I’ve said earlier…
The malt pipe has a much thicker and more solid feel to it compared to the first version. You can knock it on the corner of your table and it won’t dent easily.
Oh and it also has a cap or sleeve at the bottom edge so it’s safer to the touch.
Inside the vessel, there were volume markers to guide the brewer. Before using, I tested out the accuracy of these markings and thankfully, they’re accurate this time.
And of course…
How can I forget the built-in magnetic drive pump for recirculation?
Thoughtfully enough, an extra silicone tubing also came with the package so I attached it to the recirculation arm to maintain constant heat while I was monitoring temperatures throughout the mash.
After mashing the grains, all I had to do was raise the malt pipe and let the extracts drain. The pump for recirculation also proved useful when I was sparging the grains with water.
Aside from the malt pipe…
This unit also comes with a removable grain basket for the hop additions and whatnots.
And who could forget about the pump immersion wort chiller?
Although there’s not much to be said about the wort chiller except that it took more time than I expected for it to do its job, I still like the fact that this unit comes with one which is a steal, considering its price point.
And finally, it has a built-in spigot to make the transferring of your wort from the vessel to fermentor much easier.
I’ve attached a tube to my spigot as well to make the transmission meach neater and cleaner.
The RoboBrew V3 comes with a 120 Volt plug so it’s easier to carry around and use.
Still Looking For A Home Brewing System? Click The Button Below:
Our Analysis Comparisons and Test Results
In case you still don’t know yet, the RobBrew V3 wasn’t the only brewing system I’ve tested.
We’re always on the look for the best brewing system on the market and because we know that each one of us has different preferences and ideals, I now present to you a side by side comparison of 10 of the best home brewing systems on the market based on the metrics we’ve set and how the RoboBrew V3 performed alongside them.
Value For Money
What you see isn’t always what you get. Some items can give you more than what you’ve paid for and some less. But there are products that are just right.
Nothing more and nothing less.
With the RoboBrew V3’s features, you just get what you paid for.
No bells and whistles but no complaints, as well.
How the stacks up in the value for money ratings:
Ease of Use
Ending up with the same score as in Value for Money metric, the RoboBrew doesn’t have the flashy fully automated features other breweries have but it sure has just what you need to get you started and comfy such as the intuitive and easy to use waterproof controller and straightforward components.
How the stacks up in the ease of use ratings:
Durability
Once upon a time, durability was the number one issue with RoboBrew products.
Now in its newest version, we gotta give it to the company for improving the quality of the components greatly.
Although I’d say there are much more solid brewing systems in our list, the feel of its stainless steel materials seems like it’ll endure for a few more years.
How the stacks up in the durability ratings:
Energy Efficiency
- Dual heating element? Check.
- Individual switches? Check.
It even has a 120 volt plug to make it more universal and easier to run.
But despite these great features, the wort chiller took quite a long time to do its job and the same kind of goes with the heating elements, thus deducting a couple of points from RoboBrew.
How the stacks up in the energy efficiency ratings:
Features
Simple and straightforward with just the right kind of automation, the RoboBrew V3 is neither flashy nor lacking.
I actually liked how it doesn’t have too many fittings to screw and components to fit in like puzzle pieces.
How the stacks up in the features ratings:
RoboBrew V3 with Pump Electric Brewing System FAQs
What Gallon Size Batches Does This Produce?
The RoboBrew V3 can produce up to a 5-gallon batch of beer.
Does It Come With The Wort Chiller?
Yes, this model comes with its own immersion wort chiller.
What Is The Malt Pipe used For?
The malt pipe is used to hold the grains for mashing and to easily lift it up and remove the grains cleanly after the mashing process.
How Does It Work With Small Batches?
You can make as less as 3 gallons of beer with this model.
Our Final Verdict: RoboBrew V3 with Pump Electric Grain Brewing System
We’re just as curious as you are. So we’ve been through every single step, ensuring we don’t miss one aspect just to find the best brewing system on the market. So there you have it, here’s our last word.
Below are the overall scores of the 10 best electric homebrewing machines on the market and how the RoboBrew V3 electric brewing system stands alongside them.
Take your pick and start brewing your favorite lager or pilsner now!
Product Advertising API - Last Updated on 2024-12-26. DISCLAIMER: Some or all of the product links on this page are affiliate links. The operator of this website received a small commission if you purchase products through these links, HOWEVER, there is no added cost to you. These commissions help to fund the operation of this BDMetrics.com
